Administrator Guide

The Unisphere Central Home page is displayed.
2. Click Data Collector.
The Data Collector view is displayed.
3. Click the Users & System tab, then select the Password Configuration subtab.
4. Click Edit.
The Password Configuration dialog box opens.
5. Select Enabled.
6. Set the password requirements.
NOTE: For user interface reference information, click Help.
7. Click OK.
Apply Password Requirements to Storage Center Users
Unisphere Central local user password requirements can be applied to Storage Center users.
Prerequisites
Password Configuration must be enabled.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
The Unisphere Central Home page is displayed.
2. Click Data Collector.
The Data Collector view is displayed.
3. Click the Users & System tab, then select the Password Configuration subtab.
4. Click Edit. The Password Configuration dialog box opens.
5. Select the Storage Centers to which to apply the password requirements.
6. Click OK.
Related references
Configure Local Unisphere Central User Password Requirements on page 331
Reset Password Aging Clock
The password aging clock determines when a password expires based on the minimum and maximum age requirements. Reset
the password aging clock to start the password aging clock from the current date and time.
Prerequisites
Password Configuration must be enabled.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. Click
Data Collector.
The Data Collector view is displayed.
3. Click the Users & System tab, then select the Password Configuration subtab.
4. Click Edit. The Password Configuration dialog box opens.
5. Select the Reset Aging Clock checkbox.
6. Click OK.
332
Data Collector User Management