Administrator Guide

Steps
1. Click the Replications & Live Volumes view.
2. On the Live Migrations tab, select the Live Migration you want to modify, and then click Edit Settings.
The Edit Live Migration dialog box opens.
3. Select or clear the Deduplication checkbox, then click OK.
Change the Source Replication QoS Node for a Live Migration
Select a different QoS node to change how the Live Migration uses bandwidth.
Prerequisites
The Live Migration must be in either the Syncing or the Ready to be Swapped state.
Steps
1. Click the Replications & Live Volumes view.
2. On the Live Migrations tab, select the Live Migration you want to modify, and then click Edit Settings.
The Edit Live Migration dialog box opens.
3. From the Source Replication QoS Node drop-down menu, select the QoS definition that will be used to control bandwidth usage
between the local and remote Storage Centers.
4. Click OK.
Delete a Live Migration
Use the Live Migrations tab to delete a Live Migration whose source and destination Storage Center have not been swapped.
Prerequisites
The Live Migration must be in one of the following states:
• Syncing
• Ready to be Swapped
• Error
About this task
NOTE:
It is recommended to delete a Live Migration only when both the source and destination Storage Centers show
their status as Up and are connected to Dell Storage Manager.
Steps
1. Click the Replications & Live Volumes view.
2. On the Live Migrations tab, select the Live Migration you want to delete.
3. Click Delete.
The Delete dialog box opens.
4. Click OK to delete the Live Migration.
Viewing Live Migration Volumes
View the source or destination volume of a Live Migration in the Storage tab or IO Usage tab to see more information about the volume.
View the Source Volume of a Live Migration
View more information about the source volume of a Live Migration in the Storage tab or IO Usage tab.
Steps
1. Click the Replications & Live Volumes view.
2. On the Live Migrations tab, select the Live Migration whose source volume you want to view.
3. Click Source Volume, then select one of the following options:
• Show In Storage Tab - Displays the source volume in the Storage tab.
Storage Center Administration
113