Administrator Guide
6. From the iSCSI Network Type drop-down menu, select the speed of the iSCSI network.
7. Click Finish.
A confirmation dialog box appears.
8. Click OK.
PS Series Storage Array Import Requirements
A PS Series storage array must meet the following requirements to import data to a Storage Center storage system.
Component Requirement
PS Series Firmware Version 6.0.11 or higher
Connectivity iSCSI
Network Low-Latency, High-Bandwidth
Volume Settings
• Limit access to the volume by Storage Center IP or iSCSI initiator name.
• Enable Allow simultaneous connections from initiators with different IQNs in the
volume advanced settings.
• Stop all IO from the server to the volume.
Storage Center Import Requirements
A Storage Center storage system must meet the following requirements to import data from a PS Series storage array.
Component
Requirement
Storage Center Version 7.1 or later
Connectivity iSCSI
Network Low-latency, high-bandwidth
MD Series Import Requirements
A PowerVault MD Series must meet the following requirements to import data to a Storage Center storage system.
Component
Requirement
Hardware Platforms MD3 series
Firmware Version 08.25.09
Supported Server Operating Systems for Online Import
Performing an online import of volumes from a PS Series storage array requires one of the following server operating systems:
• Red Hat Enterprise Linux 6.7
• Red Hat Enterprise Linux 7
• SUSE Linux Enterprise 11 or 12
• Oracle Linux 6.5
• Oracle Linux 7.0
• VMware ESXi 5.5 or later
• Windows Server 2008 R2 or later
136
Storage Center Administration