Administrator Guide

3. In the File System view, click Replications.
4. Click the Replication QoS Nodes tab.
5. Click Create QoS Node.
The Create Replication QoS Node dialog box opens.
6. Type a name and choose the bandwidth limit for the node in KB/s.
7. Click OK.
The Edit Replication QoS Schedule dialog box opens.
8. Drag the mouse to select an area, right-click on it, and choose the percentage of the bandwidth limit to allow in these day and hour
combinations.
9. Click OK.
Change a QoS Node
Change a QoS (Quality of Service) node (network level) of outgoing traffic bound to a replication.
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, click Replications.
4. Click the Replication QoS Nodes tab.
5. Right-click on a QoS and select Edit Settings.
The Edit Replication QoS Settings dialog box opens.
6. Change the name and/or the bandwidth limit for the node in KB/s.
7. Click OK.
The Edit Replication QoS Schedule dialog box opens.
8. Drag the mouse to select an area, right-click on it, and choose the percentage of the bandwidth limit to allow in these day and hour
combinations.
9. Click OK.
Configure Replication Throttling
Use replication throttling to fine-tune network bandwidth usage for replication of a pair of NAS volumes between two clusters.
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, click Replications.
4. Click the Replication NAS Volumes tab, select a replication, and then right-click.
5. Select Replication Actions.
6. From the drop-down list, select Edit Replication QoS.
7. Select the Enable QoS checkbox and then select a predefined QoS node from the drop-down list.
8. Click OK.
Change Replication Throttling
To disable replication throttling on a QoS node:
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, click Replications.
4. Click the Replication NAS Volumes tab, select a replication, and then right-click.
5. Select Replication Actions.
6. From the drop-down list, select Edit Replication QoS.
7. Clear the Enable QoS checkbox to disable using a QoS node.
426
FluidFS Administration