Administrator Guide
Accept the SupportAssist Collection Agreement
Use the Accept SupportAssist Collection Agreement page to accept to the terms of the agreement and enable SupportAssist.
Steps
1. To allow SupportAssist to collect diagnostic data and send this information to technical support, select the By checking this box,
you accept the above terms and turn on SupportAssist checkbox.
2. Click Next.
NOTE: If you chose to clear the By checking this box, you accept the above terms and turn on SupportAssist
checkbox, a SupportAssist Recommended dialog box opens.
• To return to the Accept SupportAssist Collection Agreement page, click No.
• To opt out of SupportAssist, click Yes.
Provide Contact Information
Specify contact information for technical support to use when sending support-related communications from SupportAssist.
Steps
1. Specify the contact information.
2. (Storage Center 7.2 or earlier) To receive SupportAssist email messages, select the Send me emails from SupportAssist when
issues arise, including hardware failure notifications check box.
3. Select the preferred contact method, language, and available times.
4. (Storage Center 7.2 or earlier) Type a shipping address where replacement Storage Center components can be sent.
5. (Storage Center 7.2 or earlier) Click Finish.
6. (Storage Center 7.3 or later) Click Next.
Provide Site Contact Information
If the storage system is running Storage Center 7.3 or later, specify the site contact information.
Steps
1. Select the Enable Onsite Address checkbox.
2. Type a shipping address where replacement Storage Center components can be sent.
3. Click Next.
The Confirm Enable SupportAssist dialog box opens.
4. Click Yes.
Validate the SupportAssist Connection
If the storage system is running Storage Center 7.3 or later, the Validate SupportAssist Connection page opens.
About this task
The Validate SupportAssist Connection page displays a summary of the SupportAssist contact information and confirms that the
Storage Center is connected to SupportAssist.
Steps
• To complete the SupportAssist setup, click Finish.
80
Storage Center Deployment