Administrator Guide

• If a server HBA is not visible to the Storage Center, click Manually Add HBA to define it manually.
NOTE: For SAS front-end ports, use the SAS device name as the world wide name to manually add the HBA.
10. When you are finished, click OK.
Related links
Configure Front-End IO Ports (SAS and Fibre Channel)
Configure Front-End IO Ports (iSCSI)
Remove One or More HBAs from a Server
If a server HBA has been repurposed and is no longer used to communicate with the Storage Center, remove it from the server
object.
1. Expand the Dell Storage Manager menu, and then click Storage.
2. In the SC Series tab, select a Storage Center to open the Storage Center view.
3. Click the Storage tab.
4. Click the Servers subtab.
5. Select the server.
6. Click More Actions → Remove → HBAs The Remove HBAs from Server dialog box opens.
7. Select the HBAs that you want to remove.
8. When you are finished, click OK. If the HBA is used by one or more mapped volumes, a confirmation dialog box opens.
9. If a confirmation dialog box opens:
• Click Cancel to keep the HBA.
• Click OK to remove the HBA, which might interfere with the mapped volume.
Mapping Volumes to Servers
Map a volume to a server to allow the server to use the volume for storage.
Map a Volume to a Server
Map an existing volume to a server to allow the server to use it.
1. Expand theDell Storage Manager menu, and then click Storage.
2. In the SC Series tab, select a Storage Center to open the Storage Center view.
3. Click the Storage tab.
4. Click the Servers subtab.
5. Select the server.
6. Click More Actions → Map Volume to Server. The Map Volume to Server wizard opens.
7. In the Volume navigation tree, select the volume you want to map, then click Next. The wizard advances to the next page.
8. (Optional) Configure LUN settings, restrict mapping paths, or present the volume as read-only.
9. When you are done, click Finish.
Unmap One or More Volumes From a Server
If a server no longer uses a volume, you can unmap the volume from the server.
1. Expand the Dell Storage Manager menu, and then click Storage.
2. In the SC Series tab, select a Storage Center to open the Storage Center view.
3. Click the Storage tab.
4. Click the Servers subtab.
5. Select the server.
6. Click More Actions → Remove Mappings. The Remove Mappings dialog box opens.
7. Select the volumes to unmap from the server.
60
Storage Center Server Administration