Administrator Guide

6 Select the checkbox for each Storage Center to which you want to apply the settings.
7 Click OK.
Conguring Storage Center Time Settings
Date and time settings can be congured individually for each Storage Center or applied to multiple Storage Centers.
NOTE: For user interface reference information, click Help.
Set the Date and Time for a Storage Center
Select the time zone, then set the date and time or congure the Storage Center to synchronize with an NTP server.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3 Click the Time Settings tab.
4 From the Region drop-down menu, select the region where the Storage Center is located.
5 From the Time Zone drop-down menu, select the time zone where the Storage Center is located.
6 Set the date and time.
• To set the date and time manually, clear Use NTP Server, then select Set Current Time and set the date and time in the Curent
Time elds.
• To congure the Storage Center to synchronize the date and time with a Network Time Protocol server, select Use NTP Server,
then type the host name or IP address of an NTP server in the Server Host or IP Address eld.
7 Click OK.
Apply Date and Time Settings to Multiple Storage Centers
Date and time settings that are assigned to a single Storage Center can be applied to other Storage Centers.
Prerequisite
The Storage Center must be added to Storage Manager using a Storage Center user with the Administrator privilege.
Steps
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3 Click the Time Settings tab.
4 Select the Apply these settings to other Storage Centers checkbox.
5 Click Apply.
The Select Storage Center dialog box opens.
6 Select the checkbox for each Storage Center to which you want to apply the settings.
7 Click OK.
Conguring Filters to Restrict Administrative Access
Access lters can be created to selectively allow administrative access to a Storage Center based on IP address, user privilege level, or user
name. When one or more access lters are dened, administrative connections that do not match an access lter are denied.
• Storage Manager does not allow you to create an access lter policy that would reject your current administrative connection.
240
Storage Center Maintenance