Administrator Guide

Set an Asset Tag for a Disk Enclosure
An enclosure asset tag can be used to identify a specic component for company records. .
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosure, then select an enclosure.
The Enclosure view is displayed.
4 In the right pane, click Edit Settings.
The Edit Settings dialog box opens.
5 In the Asset Tag eld, type an asset tag for the enclosure.
6 Click OK.
Delete an Enclosure
Delete an enclosure if it will be physically removed from the Storage Center.
Prerequisites
• All data must be moved o the enclosure by releasing the disks and rebalancing RAID.
• The enclosure must be down.
Steps
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosure.
The Enclosure view is displayed.
4 Select the enclosure you want to delete and click Delete Enclosure. The Delete Enclosure dialog box opens.
NOTE
: If there are no disks currently in that enclosure, the dialog will not be displayed. The enclosure will be removed
without a request for conrmation.
5 Click OK.
Mute an Enclosure Alarm
Mute an enclosure alarm to prevent it from sounding.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosure and select an enclosure.
The Enclosure view is displayed.
4 Under Enclosure, select Audible Alarms.
5 In the right pane, right-click the audible alarm, then select Request Mute.
300
Storage Center Maintenance