Administrator Guide
Unmute an Enclosure Alarm
Unmute an enclosure alarm to allow it to sound.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosures and select an enclosure.
The Enclosure view is displayed.
4 Under the selected enclosure, click Audible Alarms.
5 In the right pane, right-click the audible alarm, then select Request Mute O.
Clear the Swap Status for an Enclosure Cooling Fan
Clear the swap status for an enclosure cooling fan to acknowledge that it has been replaced.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosures, then select and expand an enclosure.
The Enclosure view is displayed.
4 Under the selected enclosure, click Cooling Fan Sensors.
The Cooling Fan Sensors view is displayed.
5 In the right pane, select the cooling fan, then click Request Swap Clear.
Clear the Swap Status for an Enclosure I/O Module
Clear the swap status for an enclosure I/O module to acknowledge that it has been replaced.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosures, then select and expand an enclosure.
The Enclosure view is displayed.
4 Under the selected enclosure, click I/O Modules.
The I/O Modules view is displayed.
5 In the right pane, select the I/O module, then click Request Swap Clear.
Clear the Swap Status for an Enclosure Power Supply
Clear the swap status for an enclosure power supply to acknowledge that it has been replaced.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosures, then select and expand an enclosure.
The Enclosure view is displayed.
4 Under the selected enclosure, click Power Supplies.
The Power Supplies view is displayed.
5 In the right pane, select the power supply, then click Request Swap Clear.
Storage Center Maintenance
301