Administrator Guide
SMB File Sharing Conict
Description SMB le access is denied due to a sharing conict.
Cause When a le is opened using the SMB protocol, the opening application communicates the sharing mode that
must be used while this le is open.
This sharing mode describes what other clients' activities are allowed on this le, while it is open.
This denition is sent by the application and the client cannot control/congure it.
Once there is a violation of the sharing denition, the client receives an access denied error and an event is
issued.
Workaround This is an informative event. The administrator may contact the locking client and request to close the
application referencing this le.
It could be that the application that opened the le did not shut down gracefully. It is recommended to reboot
the client if possible.
SMB Locking Inconsistency
Description The SMB service is interrupted due to SMB interlocking issues.
Cause There are various SMB client interlocking scenarios.
Workaround The system recovers itself automatically, an event is issued when recovered.
SMB Maximum Connections Reached
Description
The maximum number of SMB connections per NAS controller has been reached.
Cause Each NAS appliance is limited to a certain number of connections.
Workaround
• If the system is in an optimal state (all NAS controllers are online) and the number of SMB clients
accessing one of the NAS controllers reaches the maximum, consider adding another NAS appliance.
• If the system is in optimal state (all NAS controllers are online) but the clients are signicantly unbalanced
between NAS controllers, rebalance the clients using Storage Manager.
• If the system is in a degraded state (one or more NAS controllers are down) and the SMB clients are
connected to the remaining NAS controller, wait until the system returns to optimal or decrease the
number of SMB clients using the system.
SMB Share Does Not Exist
Description
Client attempts to connect to a nonexistent SMB share.
Cause
• Spelling mistake on client side.
• Client is accessing the wrong server.
Workaround List the available SMB shares and verify that all SMB shares are displayed and nothing has changed
unintentionally.
Verify that you can access the problematic SMB share using a Windows client:
1 Click Run.
2 Enter the client access VIP and share name: \\<client_VIP_or_name>\<SMB_share_name>
FluidFS Administration 499