Administrator Guide
• Select or clear the Day Constraint check box to enable or disable the days of the week constraint.
• If the Day Constraint check box is selected, select the check boxes of the days of the week to monitor the threshold denition
and clear the check boxes of the days of the week to not monitor the threshold denition.
10 Click OK.
Delete a Threshold Denition
If you no longer need a threshold denition, you can delete it.
1 Click the Threshold Alerts view.
2 Click the Denitions tab.
3 Select the threshold denition to remove and click Delete in the bottom pane. The Delete Objects dialog box appears.
4 Click OK.
Delete Multiple Threshold Denitions
You can delete multiple threshold denitions simultaneously by selecting them and then right-clicking the selection.
1 Click the Threshold Alerts view.
2 Click the Denitions tab.
3 Use Shift+click and/or Control+click to select multiple threshold denitions.
4 Right-click on the selection and select Delete. The Delete Objects dialog box appears.
5 Click OK.
Assigning Storage Objects to Threshold Denitions
You can view the storage objects that threshold denitions monitor by adding or deleting the objects to a threshold denition.
Assign Storage Objects to a Threshold Denition
If you want to use an existing threshold denition to monitor additional storage objects, add them to the denition.
1 Click the Threshold Alerts view.
2 Click the Denitions tab.
3 Select the threshold denition to which to assign storage objects.
4 Click Add Objects in the bottom pane. The Add Objects dialog box appears.
The storage objects that appear in the Add Objects dialog box depend on the alert object type of the threshold denition.
5 Select the storage object(s) to assign to the threshold denition.
6 Click Finish.
Unassign Storage Objects from a Threshold Denition
If you want to stop a threshold denition from monitoring a storage object, remove the object from the denition. Storage objects cannot
be removed from threshold denitions for which the All Objects check box is selected.
1 Click the Threshold Alerts view.
2 Click the Denitions tab.
3 Select the threshold denition from which you want to unassign storage objects.
4 Click the Assigned Objects tab.
604
Storage Center Threshold Alerts