Administrator Guide
The Data Collector view is displayed.
4 Click the Monitoring tab, and then click the Automated Reports subtab.
5 Review the current report settings:
• If the settings are acceptable, click Run Now.
• To change the report settings, click Edit, adjust the settings, and click Run Now.
The Generate Reports Now dialog box opens.
6 Select the checkboxes of the reports to generate.
7 Click OK. The reports are generated and the Generate Reports dialog box closes.
NOTE: Generating a report overwrites previously generated reports in the folder for that day. To prevent these reports from
being overwritten, specify a dierent directory in the Automated Report Options area of the Automated Reports dialog box.
8 Click OK.
Congure Storage Manager to Email Reports
Storage Manager can send you automated report PDFs by email. To receive reports by email, congure SMTP server settings for the Data
Collector
, add an email address to your user account, and enable notication emails for New Automated Report events.
Congure SMTP Server Settings
The SMTP server settings must be congured to allow Storage Manager to send notication emails.
1 Connect to the Data Collector.
a Open a web browser.
b Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c Press Enter.
The Storage Manager login page is displayed.
d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.
e Click Log In.
2
If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
3 Click Data Collector.
The Data Collector view is displayed.
4 Click the Environment tab and, then click the SMTP Server subtab.
5 Click Edit.
The SMTP Server Conguration dialog box opens.
6 Congure the SMTP server settings by performing the following steps:
a In the From Email Address eld, type the email address to display as the sender of emails from the Data Collector.
b In the Host or IP Address eld, type the host name or IP address of the SMTP server.
c If the port number of the SMTP server is not 25, type the correct port number in the Port eld.
d If the SMTP server requires authentication, select the Authentication checkbox, then type the user name and password in the
SMTP User Name and SMTP User Password elds.
7 Click OK.
Storage Center Reports
627