Administrator Guide

c In the Host/IP eld, type the host name or IP address of the Storage Center.
d If you changed the web server port during installation, type the updated port in the Web Server Port eld.
8 Click Log In. The Client connects to the Storage Center and indicates that initial conguration is necessary.
9 Type a new password in the New Password and Conrm Password elds.
10 Click OK. The Congure Storage Center wizard opens.
11 Make sure that you have the required information that is listed on the rst page of the wizard. This information is needed to congure
the
Storage Center.
12 Click Next. The Submit Storage Center License page opens.
Welcome Page
Use the Welcome page to verify the Storage Center information, and optionally change the name of the Storage Center.
1 Verify that the Service Tag and serial number match the Storage Center to set up.
2 (Optional) Type a name for the Storage Center.
3 Click Next.
Submit the Storage Center License
Use the Submit Storage Center License page to type the name and title of the approving customer and to select the Storage Center
license le.
1 Click Browse.
The Select License File window opens.
2 Browse to the location of the license le, select the le, and then click Select.
3 Verify the approving customer information and license le path, then click Next.
The Create Disk Folder page opens.
Create a Disk Folder
Create a disk folder to manage unassigned disks.
1 Type a name for the disk folder.
2 (Optional) To create a secure disk folder, select the Create as a Secure Data Folder checkbox.
NOTE
: This option is available only if all drives support Secure Data.
3 Click Change to open a dialog box for selecting the disks to assign to the folder.
4 Click Next.
The Create Storage Type page opens.
5 Select the redundancy level from the drop-down menu for each disk tier.
6 (Optional) Select the datapage size from the Datapage Size drop-down menu.
7 Click Next.
The Add Controller page opens.
Storage Center Deployment
93