Owners Manual

Item Control/Feature Icon Description
– Blinking green – 8 Gbps activity
– Blinking yellow – 16 Gbps activity
– Blinking amber and yellow – Beacon
– All blinking (simultaneous) – Firmware initialized
– All blinking (alternating) – Firmware fault
• The LEDs on the 32 Gb Fibre Channel ports have the following meanings:
– All o – No power
– All on – Booting up
– Blinking amber – 8 Gbps activity
– Blinking green – 16 Gbps activity
– Blinking yellow – 32 Gbps activity
– Blinking amber and yellow – Beacon
– All blinking (simultaneous) – Firmware initialized
– All blinking (alternating) – Firmware fault
iSCSI I/O card – Ports are numbered 1 to 4 from left to right
NOTE: The iSCSI I/O card supports Data Center Bridging (DCB), but
the mezzanine card does not support DCB.
• The LEDs on the iSCSI ports have the following meanings:
– O – No power
– Steady Amber – Link
– Blinking Green – Activity
SAS I/O card – Ports are numbered 1 to 4 from left to right
The SAS ports on SAS I/O cards do not have LEDs.
2
Identication LED Blinking blue continuously – A command was sent to the storage system to make
the LED blink so that you can identify the storage system in the rack.
The identication LED blinks on the control panel of the chassis, which allows
users to nd the storage system when looking at the front of the rack.
The identication LEDs on the storage controllers also blink, which allows users to
nd the storage system when looking at the back of the rack.
3 Cache to Flash (C2F)
• O – Running normally
• Blinking green – Running on battery (shutting down)
4 Health status
• O – Unpowered
• Blinking amber
– Slow blinking amber (2s on, 1s o) – Controller hardware fault was
detected. Use Storage Manager to view specic details about the
hardware fault.
– Fast blinking amber (4x per second) – Power good and the pre-operating
system is booting
• Blinking green
– Slow blinking green (2s on, 1s o) – Operating system is booting
– Blinking green (1s on, 1s o) – System is in safe mode
– Fast blinking green (4x per second) – Firmware is updating
• Solid green – Running normal operation
10 SCv3000 and SCv3020 Storage System Hardware