Owners Manual
Table Of Contents
- Dell SCv300 and SCv320 Expansion Enclosure Owner's Manual
- About this Guide
- About the SCv300 and SCv320 Expansion Enclosure
- SCv300 and SCv320 Expansion Enclosure Overview
- SCv300 and SCv320 Expansion Enclosure Monitoring and Diagnostics
- SCv300 and SCv320 Expansion Enclosure Front-Panel Features and Indicators
- SCv300 and SCv320 Expansion Enclosure Back-Panel Features and Indicators
- SCv300 and SCv320 Expansion Enclosure EMM Features and Indicators
- SCv300 and SCv320 Expansion Enclosure Drives
- Replacing SCv300 and SCv320 Expansion Enclosure Components
- Troubleshooting SCv300 and SCv320 Components
- SCv300 and SCv320 Expansion Enclosure Technical Specifications
Figure 10. Front View of the Expansion Enclosure Showing the Failed Hard Drive
Replace a Hard Drive
Use this procedure to replace a failed hard drive.
Prerequisite
Use SupportAssist to send diagnostic data to Dell Technical Support Services.
About this task
Hard drives can be replaced without shutting down the expansion enclosure.
CAUTION: To prevent a storage system reset, at least one powered drive must remain installed in the primary chassis
when multiple drives are replaced.
Steps
1. Remove the front bezel.
A solid amber LED is lit on the failed hard drive.
2. Press the release button to open the hard drive carrier release handle.
3. Slide the hard drive out until it is free of the hard drive slot.
Figure 11. Replacing a Hard Drive
1.
Hard drive carrier release handle 2. Hard drive indicators
13