Owners Manual
Table Of Contents
- Dell SCv300 and SCv320 Expansion Enclosure Owner's Manual
- About this Guide
- About the SCv300 and SCv320 Expansion Enclosure
- SCv300 and SCv320 Expansion Enclosure Overview
- SCv300 and SCv320 Expansion Enclosure Monitoring and Diagnostics
- SCv300 and SCv320 Expansion Enclosure Front-Panel Features and Indicators
- SCv300 and SCv320 Expansion Enclosure Back-Panel Features and Indicators
- SCv300 and SCv320 Expansion Enclosure EMM Features and Indicators
- SCv300 and SCv320 Expansion Enclosure Drives
- Replacing SCv300 and SCv320 Expansion Enclosure Components
- Troubleshooting SCv300 and SCv320 Components
- SCv300 and SCv320 Expansion Enclosure Technical Specifications
![](/manual/dell/storage-scv320/owners-manual-english/images/img-16.png)
Post-Replacement Procedures
Perform the procedures described in this section after replacing a component of an SCv300 and SCv320 expansion enclosure.
Send Diagnostic Data Using Dell SupportAssist
After replacing components, use Dell SupportAssist to send diagnostic data to Dell Technical Support Services.
1. Use Dell Storage Manager to connect to the Storage Center.
2. In the Summary tab, click Send SupportAssist Information Now, which is located under SupportAssist Actions in the Status
pane.
The Send SupportAssist Information Now dialog box opens.
3. Select Storage Center Conguration and Detailed Logs.
4. Click OK.
Change the Operation Mode of the Storage Center to Normal
Change the operation mode of the Storage Center to Normal after replacing components.
1. Use Dell Storage Manager to connect to the Storage Center.
2. In the Summary tab, click Edit Settings. The Edit Storage Center Settings dialog box opens.
3. Click the General tab.
4. In the Operation Mode eld select Normal.
5. Click OK.
16