Setup Guide

Figure 1. SCv300/SCv320 Expansion Enclosure Components
1. Power cables 2. SAS cables
3. Front bezel 4. Documentation
5. Expansion enclosure 6. Rack rails (2)
Installing the Expansion Enclosure in a Rack
Install the SCv300/SCv320 expansion enclosure in a rack.
NOTE: Mount the expansion enclosure in a manner that allows for expansion in the rack and prevents the rack from
becoming topheavy.
1. Assemble the rails, following the safety instructions and the rack installation instructions that were provided with your expansion
enclosure.
2. Determine where to mount the expansion enclosure in the rack and mark the location.
3. Install the rack rails at the marked location.
4. Mount the expansion enclosure chassis on the rails.
Figure 2. Mount the Expansion Enclosure Chassis in the Rack
5. Secure the expansion enclosure chassis to the rack using the mounting bolts.
For more information about installing the expansion enclosure, contact Dell Technical Support Services.
4