Owners Manual

Figure 6. Mounting Location from Front and Back of Rack
1 Location for the clip nuts to secure the top cover 2 Location for the clip nuts to secure the expansion
enclosure
3 Location for the expansion enclosure rack rails 4 Location for the 1U cable management tray rails
Install the Cable Management Tray
If you plan to use the 1U cable management tray, install the tray before installing the SCv360 expansion enclosure.
Prerequisite
Identify the hardware that is used to install the 1U cable management tray in a rack .
Table 1. Identify the Hardware
Part Part Number Description
Screwdriver 034-000-193 6-in-1 screwdriver (Quantity: 1)
Left rail 042-034-012 Left rail for the cable management tray (Quantity: 1)
Right rail 042-034-008 Right rail for the cable management tray (Quantity: 1)
Cable management tray 042-033-060 1U cable management tray (Quantity: 1)
Cable management chain 150-000-168 Chains for managing cables (Quantity: 2)
Chassis bracket 043-043-023 Bracket that secures the cable management chains to the chassis (Quantity: 1)
Front bezel 100-563-123 Bezel for the front of the cable management tray (Quantity: 1)
036-034-012
#8-32 x 3/4 in. Phillips screw (Quantity: 5)
Used to secure the cable management tray rails to a rack, regardless of the rack
type
Optional
036-034-003
Square hole alignment pin (Quantity: 9)
Replacement alignment pin used to mount tray rails in racks that have 0.375 in.
square holes
036-034-004
Threaded hole alignment pin (Quantity: 9)
Replacement alignment pin used to mount tray rails in racks that have threaded
holes
14 SCv360 Expansion Enclosure Installation