Developers Guide

Preparing MD3 volumes for import
35 Data Migration from Dell PS Series or PowerVault MD3 to Dell EMC SC Series Storage using Thin Import | 3041-BP-EM
5. The WWNs used for that fault domain are listed under Physical Ports.
Note: On SC Series arrays with more than one fault domain, record the Physical Port WWNs for each fault
domain zoned to the MD3 Series array.
6. Open the PowerVault Modular Disk Storage Manager (Array Management window) and connect to
the MD3 array.
7. Click the Host Mappings tab.
8. Right-click the array, and select Define > Host.