White Papers

30 Configuring iSCSI Connectivity with VMware vSphere 6 and Dell PS Series Storage | TR1075
4. This example creates a basic access point using IP access controls, and assigns the IPs used in the
previously created standard iSCSI vSwitch. Select the Define one or more basic access points
radio button, and then under Define one of more basic access points pane, click Add.
In the New Basic Access Point dialog window, in the IP address field, enter the IP address
assigned to the first VMkernel port in the previously created iSCSI vSwitch and click OK. Repeat
this step for each VMkernel port in the host assigned to iSCSI vSwitch.
Note: There are many options for defining access to an iSCSI volume, and this is beyond the scope of the
document. Refer to the firmware Group Administrators Guide and the document, Access Control
Policies, for additional information.
5. Select the Yes radio button to allow simultaneous access to the volume from more than one
initiators. This option is necessary to enable the multiple ESXi hosts in the vSphere cluster to
access to this volume at the same time.