White Papers

24 BP1043 | Configuring Windows Server 2008 R2 for iSCSI SAN Boot with EqualLogic Storage
Figure 9 iSCSI boot configuration menu for Intel network adapters
5. Select iSCSI CHAP configuration and press [Enter] to configure CHAP if needed.
6. Save changes and exit.
7. Configure other Intel network adapter ports if available. Enter “S” to make it secondary boot path.
Configure the Secondary network adapter as shown above in steps 3 to 6 and exit after saving. Exit
by pressing [ESC].
8. When you exit the Intel iSCSI Remote Boot setup, the network adapter immediately connects to
the specified target. Verify that the login to the target is successful as shown in Figure 10.