Developers Guide

9 Dell EMC SC Series and Active Directory Integration | CML1135
5. Enter the name of the SC Series array in the Name field, and provide the IP address of the SC Series
array. For a single-controller SC Series array, enter the controller IP address. For a dual-controller SC
Series array, enter the management IP address. Leave the Create associated pointer (PTR) record
box checked. Click Add Host.
Note: Creating a pointer (PTR) record will fail if a reverse lookup zone has not been configured for the
subnet where the SC Series array resides. Click OK to close the error message and continue creating the
Host (A) record.
To create a reverse lookup zone and PTR record, refer to section 3.1.2 of this document.
6. Once the Host (A) record is created, verify that it is listed in the DNS Manager.