User guide

Back to Contents Page

 Speaker Assembly

DellStudio™1557/1558ServiceManual

Removing the Speaker Assembly

Replacing the Speaker Assembly



Removing the Speaker Assembly



1. Follow the instructions in Before You Begin.



2. Remove the palm rest (see Removing the Palm Rest).



3. Remove the screw on the palm rest.



4. Turn the palm rest over.



5. Remove the four screws on the speakers.



6. Release the speaker cable from the securing tabs on the palm rest and take out the speaker assembly.

Replacing the Speaker Assembly



1. Follow the instructions in Before You Begin.



WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working

inside the computer.

screw

screws (4)

speaker cable