Manual
228 Connecting Your Computer to a TV and Adjusting Display Settings
What to do If the TV Does not Recognize a Signal
1
Turn off the TV.
2
Disconnect the S-Video cable from the TV.
3
Look on the back of the TV for the connection labeled
S-Video 1
.
4
Reconnect the S-Video cable to the correct connection for
S-Video 1
.
5
Turn on the TV.
6
Access the TV menu and select option #8 AV3 (
S-Video 1
).
7
Access the
Display Properties Menu
on the computer.
8
Select the tab for the vendor video card.
9
Use the vendor video card control panel to select the appropriate display
settings.
EXAMPLE: If you are connecting an S-Video cable from the computer
to the TV and you have inserted it into the S-Video connection labeled
S-Video 1 on the back of the TV, then select option #8 for AV3
(S-Video 1).
FOR MORE INFORMATION: To learn more about using a video card
control panel, see "Using a Video Card Wizard to Configure Display
Settings
" on page 247.