Manual

Drives and Media 83
Windows Vista
®
1 Click Start → Computer .
For Windows
®
XP:
Click Start → My Computer .
2 Right-click Local Disk (C:) .
3 Click Properties → Tools → Check Now .
NOTE: The User Account Control window may appear. If you are an
administrator on the computer, click Continue; otherwise, contact your
administrator to continue the desired action.
4 Click to check Scan for and attempt recovery of bad sectors , and then
click
Start .
Working with RAID
A redundant array of independent disks (RAID) is a disk storage
configuration that increases performance or data redundancy. There are four
basic RAID levels discussed in this section.
NOTE: RAID requires multiple hard drives. The number of hard drives required
varies depending on the RAID configuration.
• RAID level 0 is recommended for higher performance (faster throughput).
• RAID level 1 is recommended for users who need a high level of data
integrity.
• RAID level 0+1 is recommended for higher performance and data
integrity
• RAID level 5 is recommended for higher performance and fault tolerance.
RAID Level 0
NOTICE: RAID level 0 provides no redundancy. Therefore, a failure of one drive
results in the loss of all data. Perform regular backups to protect your data.
FOR MORE INFORMATION:
Your computer may support other RAID
levels (5, 10, 50). For information about these levels, see
support.dell.com.