Manual

92 Drives and Media
6 Under RAID Mode Selection , select Mirroring or Striping from the drop-
down menu.
7 Click Next .
NOTICE: You lose all data on the drives selected in the next step. Back up any data
you want to keep before continuing.
8 Under Free Disk Selection , click the check box next to the hard drive(s)
you want to include in the array.
9 Click Finish .
The MediaShield RAID management utility window appears and displays
the status of the upgrade/migration process along with any other installed
hard drives.
Rebuilding a RAID Configuration (RAID 1 only)
If one of the hard drives in a RAID 1 array fails, you can rebuild the array by
restoring the data to a replacement drive.
1
Launch Nvidia MediaShield.
2 Click to select your RAID configuration ( Mirroring ) in the management
utility window.
3 Select Rebuild Array in the System Tasks pane.
The
NVIDIA Rebuild Array Wizard screen appears.
4 Click Next .
5 Select the hard drive you want to rebuild by clicking the check box beside
it.
6 Click Next → Finish.
The MediaShield RAID management utility window appears and displays
the status of the rebuild.
NOTE: You can use your computer while the computer is rebuilding the array.
Using the Intel
®
RAID Utilities
If installed on your system, see the following sections for information about
using the Intel utilities.
• "Configuring a RAID 0 or RAID 1 Array Before Installing the Operating
System" on page 93.