Service Manual


Replacing the Media Card Reader

1. Follow the procedures in Before You Begin.

2. Gently slide the Media Card Reader guides into the slots in the top panel.

3. Replace the two screws that secure the Media Card Reader to the front panel.

4. Connect the Media Card Reader cable to the system board connector (see System Board Components).

5. Replace the top cover (see Replacing the Top Cover).

6. Replace the optical drive (see Replacing the Optical Drive).

7. Replace the front bezel (see Replacing the Front Bezel).

8. Replace the computer cover (see Replacing the Computer Cover).

9. Connect your computer and devices to electrical outlets, and then turn them on.
FlexDock

Removing the FlexDock

1. Follow the procedures in Before You Begin.

2. Remove the computer cover (see Removing the Computer Cover).

3. Remove the front bezel (see Removing the Front Bezel).

4. Disconnect the FlexDock USB cable from the system board connector (see System Board Components).

5. Remove the two screws that secure the FlexDock to the drive panel.
1
Media Card Reader guides (2)
2
slots (2)
3
Media Card Reader
4
screws (2)