Service Manual



6. Slide the FlexDock out through the front of the computer.



Replacing the FlexDock



1. Follow the procedures in Before You Begin.



2. If this is the first time you are installing the FlexDock:

a. Align the tip of a Phillips screwdriver with the breakaway metal plate slot on the front panel and rotate the screwdriver outwards to remove the

breakaway metal plate.

b. Remove the filler bracket on the front bezel, if applicable (see Removing the Filler Bracket)

NOTE: If you are not replacing the FlexDock at this time, replace the filler bracket (see Replacing the Filler Bracket).

drive panel

screws (2)

FlexDock

FlexDock USB cable