Users Guide
Table Of Contents
- SupportAssist Enterprise Version 2.0.60 User's Guide
- Overview
- Getting started with SupportAssist Enterprise
- Set up SupportAssist Enterprise on local system
- Setting up SupportAssist Enterprise for remote devices
- Evaluating SupportAssist Enterprise
- Download the SupportAssist Enterprise installation package
- Installing or upgrading SupportAssist Enterprise
- Minimum requirements for installing and using SupportAssist Enterprise
- Installing SupportAssist Enterprise
- Upgrading SupportAssist Enterprise
- Migrating to SupportAssist Enterprise
- Using SupportAssist Enterprise without registration
- Register SupportAssist Enterprise
- Set up an SELinux enabled system to receive alerts
- Open the SupportAssist Enterprise user interface
- Log in to SupportAssist Enterprise
- Log out of SupportAssist Enterprise
- Adding devices
- Methods of adding devices
- Device types and applicable devices
- Add a server or hypervisor
- Add an iDRAC
- Add a chassis
- Add a Networking device
- Add a PowerVault storage array
- Add an EqualLogic PS Series storage solution
- Add a Compellent SC Series storage solution
- Add a Fluid File System NAS device
- Add a software
- Add a solution
- Add a virtual machine
- Add a device by duplication
- Managing device discovery rules
- Viewing cases and devices
- Monitoring site health
- Using Extensions
- Types of extensions
- Support for setting up adapter or Remote Collector
- Getting started with adding devices managed by systems management consoles
- Adapters overview
- Set up OpenManage Essentials adapter
- Set up the Microsoft System Center Operations Manager adapter
- Management Packs for inventorying devices managed by Operations Manager
- Set up OpenManage Enterprise adapter
- View the adapter overview pane
- View devices inventoried by the adapter
- Synchronize adapter
- Edit adapter
- Delete adapter
- Approximate time required to assign Credential Profile
- Remote Collectors overview
- Device grouping
- Managing device credentials
- Validating device inventory
- Maintaining SupportAssist Enterprise capability
- Enable or disable monitoring of a device
- Perform deep discovery
- Install or upgrade OMSA by using SupportAssist Enterprise
- Configure SNMP settings by using SupportAssist Enterprise
- View and update the contact information
- View and update parts dispatch information
- Integrate SupportAssist Enterprise with your TechDirect account
- Configure proxy server settings
- Connectivity test
- Test the case creation capability
- Clear the System Event Log
- Automatic update
- Delete a device
- Configuring email notifications
- Configuring collection settings
- Prerequisites for collecting system information
- Enable or disable the automatic collection of system information on case creation
- Enable or disable analytics collections
- Enable or disable the periodic collection of system information from all devices
- Enable or disable the collection of identity information
- Enable or disable the collection of system information
- Enable or disable the automatic upload of collections
- Enable or disable analytics collections
- Viewing collections
- Using SupportAssist Enterprise to collect and send system information
- Understanding maintenance mode
- SupportAssist Enterprise user groups
- Manually configuring SNMP settings
- Manually configuring the alert destination of a server
- Manually configuring the alert destination of a server by using the script file on server running Windows
- Manually configuring the alert destination of a server running Windows
- Manually configuring the alert destination of a server by using the script file on a server running Linux
- Manually configure alert destination of server running Linux
- Manually configure alert destination of iDRAC using the web interface
- Manually configure alert destination of networking device
- Manually configuring the alert destination of a server
- Managing SupportAssist Enterprise alerts in TechDirect
- Other useful information
- Monitoring servers for hardware issues
- Support for automatically installing or upgrading OMSA
- Support for automatically configuring SNMP settings
- Installing patch for SupportAssist Enterprise
- Enable or disable API interface settings
- Signing in to TechDirect
- Deep discovery
- Device correlation
- Association view
- Detection of hardware issues in attached storage devices
- Support for OEM devices
- Install Net-SNMP on a server running Linux
- Configure sudo access for SupportAssist Enterprise on server running Linux
- Ensuring successful communication between the SupportAssist Enterprise application and the SupportAssist server
- Accessing the SupportAssist Enterprise application logs
- Event storm handling
- Accessing the context-sensitive help
- View SupportAssist Enterprise product information
- Uninstalling SupportAssist Enterprise
- Identify series of PowerEdge server
- Troubleshooting
- Installing SupportAssist Enterprise
- SupportAssist Enterprise registration
- Opening the SupportAssist Enterprise user interface
- Logging in to SupportAssist Enterprise
- Unable to add device
- Unable to add adapter
- Unable to add Remote Collector
- Disconnected
- OMSA not installed
- SNMP not configured
- New version of OMSA available
- Unable to configure SNMP
- Unable to verify SNMP configuration
- Unable to install OMSA
- Unable to verify OMSA version
- OMSA not supported
- Unable to reach device
- Unable to gather system information
- Insufficient storage space to gather system information
- Unable to export collection
- Unable to send system information
- Authentication failed
- Clearing System Event Log failed
- Maintenance mode
- Auto update
- Unable to edit device credentials
- Automatic case creation
- Scheduled tasks
- SupportAssist Enterprise services
- Unable to view tool tips in Mozilla Firefox
- Other services
- Security
- Logs
- SupportAssist Enterprise user interface
- SupportAssist Enterprise Registration Wizard
- Login page
- Site Health
- Cases page
- Devices page
- Site Inventory Validation
- Device Groups page
- Manage Device Discovery Rule
- Manage Account Credentials
- Manage Credential Profiles
- Collections page
- Analytics Collections
- Extensions
- Settings
- Network Connectivity Test
- SupportAssist Enterprise test
- Error code appendix
- SupportAssist Enterprise resources
- Contacting Dell EMC
Ensuring successful communication between the
SupportAssist Enterprise application and the
SupportAssist server
The server where SupportAssist Enterprise is installed must be able to communicate with the SupportAssist server hosted by
Dell EMC to:
● Automatically create a support case if there is a problem with a device in your environment.
● Upload the collected system information to Dell EMC.
To ensure that the SupportAssist Enterprise application is able to successfully communicate with the SupportAssist server:
● The server where the SupportAssist Enterprise application is installed must be able to connect to the following destinations:
○ https://apidp.dell.com and https://api.dell.com — end point for the SupportAssist server hosted by Dell EMC.
○ https://is.us.dell.com/* — the file upload server and related services.
○ https://downloads.dell.com/ — For downloading Dell EMC OpenManage Server Administrator (OMSA) and receiving
new SupportAssist Enterprise release information, policy files, and product support files.
○ https://sa-is.us.dell.com/* — For TechDirect integration.
○ On the server where SupportAssist Enterprise is installed, verify if port 443 is open for both incoming and outgoing
communication on is.us.dell.com, downloads.dell.com, apidp.dell.com, and api.dell.com. You can use a telnet client
to test the connection. For example, use the following command: is.us.dell.com 443
● On the server where SupportAssist Enterprise is installed, verify if the network settings are correct.
● If the server where SupportAssist Enterprise is installed connects the Internet through a proxy server, configure the proxy
settings in SupportAssist Enterprise. See Configure proxy server settings.
If the communication problem persists, contact your network administrator for further assistance.
Accessing the SupportAssist Enterprise application
logs
About this task
SupportAssist Enterprise saves system events and log messages in the following locations:
● On Windows:
○ Windows Event Log
○ The installation logs folder (<Drive where SupportAssist Enterprise is installed>:\Program Files
\Dell\SupportAssist\logs)
● On Linux:
○ var logs
○ The installation logs folder (/opt/dell/supportassist/logs)
A new log file is created daily at 11:59 p.m. based on the time zone configured on the system, and the log is stored in the logs
folder. The log file contains log information for the current day. At the end of each day, the log file is renamed as
application.log <date format in yyyymmdd>. If the log file is older than two days, the log file is zipped automatically. This
enables you to identify the exact log file stored for a given date when alerts occur. For example, log files similar to the following
are created:
● application.log
● application.log. 20171101
● application.log. 20171102 .zip
● application.log. 20171103 .zip
The log files are purged from storage after 30 days.
The log file contains log messages that correspond to the following values (or higher) in the log4j.xml file: FATAL, ERROR,
WARN, INFO, and DEBUG, with special values of OFF and ALL. The log4j.xml file is available at <Drive where
144
Other useful information