Users Guide
Table Of Contents
- SupportAssist Enterprise Version 2.0.70 User's Guide
- Contents
- Overview
- Getting started with SupportAssist Enterprise
- Set up SupportAssist Enterprise on local system
- Setting up SupportAssist Enterprise for remote devices
- Evaluating SupportAssist Enterprise
- Download the SupportAssist Enterprise installation package
- Installing or upgrading SupportAssist Enterprise
- Minimum requirements for installing and using SupportAssist Enterprise
- Installing SupportAssist Enterprise
- Upgrading SupportAssist Enterprise
- Migrating to SupportAssist Enterprise
- Using SupportAssist Enterprise without registration
- Register SupportAssist Enterprise
- Set up an SELinux enabled system to receive alerts
- Open the SupportAssist Enterprise user interface
- Log in to SupportAssist Enterprise
- Log out of SupportAssist Enterprise
- Adding devices
- Methods of adding devices
- Device types and applicable devices
- Add a server or hypervisor
- Add an iDRAC
- Add a chassis
- Add a Networking device
- Add a PowerVault storage array
- Add an EqualLogic PS Series storage solution
- Add a Compellent SC Series storage solution
- Add a Fluid File System NAS device
- Add a software
- Add a solution
- Add a virtual machine
- Add a device by duplication
- Managing device discovery rules
- Viewing cases and devices
- Monitoring site health
- Using Extensions
- Types of extensions
- Support for setting up adapter or Remote Collector
- Getting started with adding devices managed by systems management consoles
- Adapters overview
- Set up OpenManage Essentials adapter
- Set up the Microsoft System Center Operations Manager adapter
- Management Packs for inventorying devices managed by Operations Manager
- Set up OpenManage Enterprise adapter
- View the adapter overview pane
- View devices inventoried by the adapter
- Synchronize adapter
- Edit adapter
- Delete adapter
- Approximate time required to assign Credential Profile
- Remote Collectors overview
- Device grouping
- Managing device credentials
- Validating device inventory
- Maintaining SupportAssist Enterprise capability
- Enable or disable monitoring of a device
- Perform deep discovery
- Install or upgrade OMSA by using SupportAssist Enterprise
- Configure SNMP settings by using SupportAssist Enterprise
- View and update the contact information
- View and update parts dispatch information
- Integrate SupportAssist Enterprise with your TechDirect account
- Configure proxy server settings
- Connectivity test
- Test the case creation capability
- Clear the System Event Log
- Automatic update
- Delete a device
- Configuring email notifications
- Configuring collection settings
- Prerequisites for collecting system information
- Enable or disable the automatic collection of system information on case creation
- Enable or disable analytics collections
- Enable or disable the periodic collection of system information from all devices
- Enable or disable the collection of identity information
- Enable or disable the collection of system information
- Enable or disable the automatic upload of collections
- Enable or disable analytics collections
- Viewing collections
- Using SupportAssist Enterprise to collect and send system information
- Understanding maintenance mode
- SupportAssist Enterprise user groups
- Manually configuring SNMP settings
- Manually configuring the alert destination of a server
- Manually configuring the alert destination of a server by using the script file on server running Windows
- Manually configuring the alert destination of a server running Windows
- Manually configuring the alert destination of a server by using the script file on a server running Linux
- Manually configure alert destination of server running Linux
- Manually configure alert destination of iDRAC using the web interface
- Manually configure alert destination of networking device
- Manually configuring the alert destination of a server
- Managing SupportAssist Enterprise alerts in TechDirect
- Other useful information
- Monitoring servers for hardware issues
- Support for automatically installing or upgrading OMSA
- Support for automatically configuring SNMP settings
- Installing patch for SupportAssist Enterprise
- Enable or disable API interface settings
- Signing in to TechDirect
- Deep discovery
- Device correlation
- Association view
- Detection of hardware issues in attached storage devices
- Support for OEM devices
- Install Net-SNMP on a server running Linux
- Configure sudo access for SupportAssist Enterprise on server running Linux
- Ensuring successful communication between the SupportAssist Enterprise application and the SupportAssist server
- Accessing the SupportAssist Enterprise application logs
- Event storm handling
- View SupportAssist Enterprise product information
- Uninstalling SupportAssist Enterprise
- Troubleshooting
- Installing SupportAssist Enterprise
- SupportAssist Enterprise registration
- Opening the SupportAssist Enterprise user interface
- Logging in to SupportAssist Enterprise
- Unable to add device
- Unable to add adapter
- Unable to add Remote Collector
- Disconnected
- OMSA not installed
- SNMP not configured
- New version of OMSA available
- Unable to configure SNMP
- Unable to verify SNMP configuration
- Unable to install OMSA
- Unable to verify OMSA version
- OMSA not supported
- Unable to reach device
- Unable to gather system information
- Insufficient storage space to gather system information
- Unable to export collection
- Unable to send system information
- Authentication failed
- Clearing System Event Log failed
- Maintenance mode
- Auto update
- Unable to edit device credentials
- Automatic case creation
- Scheduled tasks
- SupportAssist Enterprise services
- Unable to view tool tips in Mozilla Firefox
- Other services
- Security
- Logs
- SupportAssist Enterprise user interface
- SupportAssist Enterprise Registration Wizard
- Login page
- Site Health
- Cases page
- Devices page
- Site Inventory Validation
- Device Groups page
- Manage Device Discovery Rule
- Manage Account Credentials
- Manage Credential Profiles
- Collections page
- Analytics Collections
- Extensions
- Settings
- Network Connectivity Test
- SupportAssist Enterprise test
- Error code appendix
- SupportAssist Enterprise resources
- Contacting Dell EMC
● Servers running Linux, ESXi, and Hyper-V
● PowerEdge M1000e
● PowerEdge VRTX
● PowerEdge FX2/ FX2s
● PowerEdge MX7000
● PowerEdge XE2420
● Storage SC Series devices (previously Dell Compellent)
● Dell Networking devices—OS9 and OS10
NOTE: OS10 support is limited only to PowerEdge MX7000 switches.
● OEM devices
● IOM devices
● Storage MD Series arrays (previously PowerVault)
● Storage ME4 Series arrays
NOTE: One OpenManage Enterprise adapter can inventory and add devices from multiple OpenManage Enterprise
instances.
If a device retrieved through the adapter is already managed by the OpenManage Enterprise SupportAssist plugin that is
installed, registered, and enabled in OpenManage Enterprise Version 3.5 or later, SupportAssist Enterprise does not monitor the
device for hardware issues and also does not collect and upload system information to Dell EMC. You can only view the name
or IP address of the device and the model name in SupportAssist Enterprise. SupportAssist Enterprise also does not display
information about the support case that is created for the device.
Steps
1. Go to Extensions > Manage Adapters.
The Adapters page is displayed.
2. Click Set Up Adapter.
The Set Up Adapter window is displayed.
3. From the Adapter type list, select OpenManage Enterprise.
4. Perform the following:
a. Enter the hostname or IP address of the server where OpenManage Enterprise is deployed.
b. Optionally, enter a name for the adapter.
The name that you enter is used to represent the adapter in SupportAssist Enterprise. If you do not enter a name, the
hostname or IP address that you have entered is used to represent the adapter.
c. Enter the username and password that is required to access the OpenManage Enterprise instance.
NOTE:
The Role Based Access Control (RBAC) and Scope-Based Access Control (SBAC) capabilities in
OpenManage Enterprise Version 3.6 or later enable you to limit access to users or restrict the device groups that are
managed by device managers in OpenManage Enterprise. To inventory and monitor all the devices in SupportAssist
Enterprise through the OpenManage Enterprise adapter, you must enter the administrator account credentials of the
OpenManage Enterprise instance.
NOTE: The password must not exceed 50 characters.
5. From the Credential profile list, select a credential profile that contains the account credentials for the device types that
will be inventoried by the adapter.
NOTE:
If a device inventoried by the adapter has different account credentials, you can manually reassign the correct
account credentials for the device. See Reassign Account Credentials.
6. From the Update device inventory list, select the required frequency for inventorying devices through the adapter.
7. Click OK.
The Adapter Details overview pane is displayed and devices that are managed by OpenManage Enterprise are inventoried in
SupportAssist Enterprise.
Next steps
If the credential profile that you selected contains the correct credentials for the inventoried devices, the devices are added to
the Default group. Devices for which the credentials are either not correct or not available are moved to the Staging group.
Using Extensions
69