Owner's Manual

* If an older version of OMSA is already installed on the system, in
rare cases DSET may not be able to collect new data features since it
must utilize the older OMSA drivers already loaded.
* DSET reports can only be opened with Internet Explorer 6.0 and above
and Mozilla based browsers that contain MSXML support. Reports cannot
be viewed with Netscape, Konquerer or other browsers that don't
support HTML applications.
* Dsetreport.hta fails to show data properly when company name has
extended ASCII character"^". The report works fine for every other
extended ASCII character.
* DSET cannot collect storage information on 745N, 750N, 755N, 770N,
and 775N.
* DSET may not collect System and Storage information correctly if Dell
PowerEdge Diagnostics (Online Diagnostics) is already installed on
the system (444265).
* DSET will not collect drive part number and revision for SCSI devices.
* DSET may not show NMI and power button status in Front panel
(365621).
* DSET may not retain company name in report file name after DSET
installer upgrade
* Power consumption and current amperage may be missing on some systems
(417395).
* Windows OS page shows maximum Page File size instead of minimum size
(257663).
* Slots page may show some blade server mezannine slots as "unoccupied"
when populated (284137).
* Hardware Log does not sort contents correctly by Severity (292199).
* Fibre Channel HBA information may be missing from the Storage section
of the report (297275).
* When OMSA 5.5 or an older version is installed on the system, DSET
report creation ran from CLI may pop up few message boxes for missing
entry point functions (411739).
* OpenManage Server Administrator installation logs are not collected
(470887).
* If the OMSA services are stopped, the MASER information might not
appear on the firmware page.
* The same SCSI and SAS tape information might appear twice in the GUI
(HTA report), in the same tape tree structure (471934).
* On windows 64 bit operating system, the DellEvtRdr64.exe may throw