Dell System E-Support Tool (DSET) Version 3.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2013 Dell Inc.
Contents 1 Introduction..................................................................................................................................5 What's New In This Release.................................................................................................................................... 5 Supported Platforms And Operating Systems.......................................................................................................... 5 Other Documents You May Need..................
Introduction 1 Dell System E-Support Tool (DSET) is a utility that collects configuration and log data for various chassis hardware, storage, software, and operating system components of a Dell PowerEdge server and consolidates the data into a .zip file. What's New In This Release • Support for Microsoft Windows Server 2012.
3. In the Select your product type section, click Software, Monitors, Electronics & Peripherals. 4. In the Choose your Dell Software, Monitors, Electronics & Peripherals section, click Software. 5. In the Choose your Dell Software section, click the required link from the following: – Client System Management – Enterprise System Management – Remote Enterprise System Management – Serviceability Tools 6. To view the document, click the required product version.
Using Dell System E-Support Tool (DSET) Application 2 Using the DSET application, you can generate reports on local and remote systems.
For information about report filtering, see Report Filtering. Report Filtering During Dell System E–Support Tool (DSET) report collection, you can filter a few data from the report such as: • • • • • • • • • • • • Host name IP address Subnet mask Default gateway MAC address DHCP server DNS server Processes Environment variables Registry Logs iSCSI data NOTE: For one-time report collection (Zero FootPrint report), all of the data is filtered.
DellSystemInfo.exe [Options] On Systems Running Linux At the command prompt, run any of the following commands: dellsysteminfo [Options] Or Change directory to /opt/dell/advdiags/dset/bin and run the command dellsysteminfo.sh [Options] List Of CLI Options The -h option displays the list of available CLI options. To view the options, run the following command: • On systems running Windows: DellSystemInfo.exe -h • On systems running Linux: dellsysteminfo -h Table 1.
Command Description NOTE: If -p is not included in the command, then you will receive a prompt to type in the password. -d, --collect Specify the type of data to be collected (one or more of the following) separated by a comma without any space: • • • • • hw— Server st— Storage sw— Software lg— Logs ad— Advanced logs NOTE: • • -n, --namespace If not specified, the default value for -d is hw, st, sw, and lg.
Command Description -r, --reportname Specify the default location for the generated report (.zip) file. The default location is desktop for Windows and /root for Linux. The default file name is DSET appended with the host name, service tag, and time stamp. Either report name or report name with full path is required to access it later and to upload to Dell Technical Support.
Table 2.
• On systems running Windows C:\Program Files\Dell\AdvDiags\DSET\bin> DellSystemInfo.exe -n root/ dsetcim -r C:\temp\all.zip • On systems running Linux dellsysteminfo -n root/dsetcim -r /opt/dell/myreports/all.zip Example 3: To collect report information with privacy enabled, auto upload to Dell Technical Support, and save it in the specified folder, run the following command: • On systems running Windows C:\Program Files\Dell\AdvDiags\DSET\bin> DellSystemInfo.exe -v yes -a auto -r C:\temp\dsetreport.
NOTE: Limited data is collected from the iDRAC7 source. Zero FootPrint Report Collection Example 1: To collect software and hardware information silently and save it in the specified location, run the following command: • On systems running Windows: Dell_DSET_3.4.0.x.exe REPORTNAME= COLLECT= /qn • On systems running Linux: dell-dset-lx(bit)-(Version_Number).
3 Error Codes This appendix provides the list of Dell System E-Support Tool (DSET) application error codes. DSET Application Error Codes DSET application returns custom error codes on collection of reports. The list of error codes returned by dellsysteminfo are: Table 4. DSET Error Codes and Description Error Code Name Description Solution 2 DSET_CIM_OPTION_ERROR Incorrect option provided in the command line. Check the command line options and provide the valid option.
Error Code Name Description 16 DSET_CIM_SW_COLLECTION_WARN Data of a few software classes are not collected. - 17 DSET_CIM_ST_COLLECTION_WARN Data of a few storage classes are not collected. - 18 DSET_CIM_INVALID_FILE_NAME_ER ROR Invalid file name is provided or the path to save the report does not exist. - 19 DSET_CIM_CLASS_NAME_ERROR Invalid class name is provided for data collection. Check for available class name.
