Owner's Manual

Versions/Systems Affected
Only OEM Servers.
Issue 25 (DSET-1099):
Description
DSET report from iDRAC will have fewer data when PERC H800 card is connected on 12G systems.
Resolution
None
Versions/Systems Affected
None
Issue 26 (DSET-1133):
Description
On Windows 64 bit System DSET Upload fails when System wide proxy is set using netsh command.
Resolution
Run the netsh command to set the system wide proxy "netsh winhttp set proxy x.x.x.x" from 32bit
command prompt (c:\windows\syswow64\cmd.exe) and then try the upload operation.
Versions/Systems Affected
Windows 64 bit
Issue 27:
Description
When DSET is installed in a linux System then even if the dset providers are registered to tog-pegasus
cimom, the providers show the dependency to the sfcb cimom due to which the uninstallation of sfcb
would fail.
Resolution
Uninstall sfcb with --nodeps option "rpm -e --nodeps sblim-sfcb-*.rpm".
Versions/Systems Affected
None
Installation
Prerequisites
For windows
• You need to be logged in as a local or Domain Administrator.
• To Install DSET on Microsoft Windows Server 2008 or later, Microsoft Windows Vista or newer,
run the DSET installer with elevated privileges using
"Run As" option.
• To install Remote Provider, Windows Management Instrumentation (WMI) service must be
running.
− If WMI is stopped, DSET starts WMI automatically and continues with installation.
− If WMI is disabled, installation of DSET terminates with an error message.
For Linux
• You need to be logged in as the root user.
• Enable SSH services for remote report collection from Linux systems.