White Papers

11 Accessing Remote Desktop using VNC on Dell PowerEdge Servers and MX7000 Modular Infrastructure
The 13G or 12G iDRAC GUI VNC settings
2.5 Configuring VNC by using RACADM CLI
1. Start a RACADM session by using the Dell Remote RACADM client or an SSH client such as PuTTY.
2. Check the existing VNC Server settings:
/admin1-> racadm get idrac.vncserver
[Key=idrac.Embedded.1#VNCServer.1]
Enable=Disabled
!!Password=******** (Write-Only)
Port=5901
SSLEncryptionBitLength=Disabled
Timeout=300
3. To get possible values for a configuration option, run the help command:
/admin1-> racadm help idrac.vncserver.SSLEncryptionBitLength
SSLEncryptionBitLength -- SSL Encryption Bit Length
Usage -- 0- Disabled 1- Auto Negotiate; 2- 128-Bit or
Higher; 3- 168-Bit or Higher; 4- 256-Bit or Higher
Required License -- VNC Server
Dependency -- None