White Papers

Technical support and resources
9 Understanding Quick Sync 2 for Dell EMC PowerEdge 14th Gen Servers and MX7000 Chassis
3.3.1 Changing settings using iDRAC GUI
To change the Quick Sync configuration settings on GUI, log in to the GUI, and then click Configuration 
System Settings  Hardware Settings  iDRAC Quick Sync.
Changing Quick Sync settings on iDRAC 9 GUI
3.3.2 Changing settings using RACADM
To obtain Quick Sync settings, run the RACADM command:
racadm>>get system.quicksync
[Key=system.Embedded.1#QuickSync.1]
Access=Read-Write
InactivityTimeout=120
InactivityTimerEnable=Enabled
#Presence=Present
ReadAuthentication=Enabled
WiFi=Enabled
Properties can be set by using the sample commands here:
racadm>>set system.quicksync.access Read-only
[Key=system.Embedded.1#QuickSync.1]
Object value modified successfully