Reference Guide

152 Lifecycle Controller Web Services Interface Guide for Linux
<n1:IsReadOnly>false</n1:IsReadOnly>
<n1:LowerBound>1</n1:LowerBound>
<n1:PendingValue/>
<n1:UpperBound>100</n1:UpperBound>
</n1:DCIM_RAIDInteger>
<n1:DCIM_RAIDInteger>
<n1:AttributeName>RAIDreconstructRate</n1:AttributeName>
<n1:CurrentValue>33</n1:CurrentValue>
<n1:FQDD>RAID.Integrated.1-1</n1:FQDD>
<n1:InstanceID>RAID.Integrated.1-1:RAIDreconstructRate</n1:InstanceID>
<n1:IsReadOnly>false</n1:IsReadOnly>
<n1:LowerBound>1</n1:LowerBound>
<n1:PendingValue/>
<n1:UpperBound>100</n1:UpperBound>
</n1:DCIM_RAIDInteger>
16.4 Getting a RAID Integer Instance
Use the following example to get an instance of the DCIM_RAIDInteger class, instead of all instances as
shown in Section 16.3.
Get a RAIDInteger instance with the following parameters and syntax:
[INSTANCEID]: This is obtained from the enumeration in Section 16.3, which shows an example using
RAID.Integrated.1-1:RAIDrebuildRate as an instanceID
EXAMPLE:
wsman enumerate http://schemas.dmtf.org/wbem/wscim/1/cimschema/2/root/dcim/DCI
M_RAIDInteger?InstanceID=[INSTANCEID]
-h $IPADDRESS -V -v -c dummy.cert -P 443
-u $USERNAME -p $PASSWORD
-j utf-8 -y basic
OUTPUT:
<n1:DCIM_RAIDInteger>
<n1:AttributeName>RAIDrebuildRate</n1:AttributeName>
<n1:CurrentValue>11</n1:CurrentValue>
<n1:FQDD>RAID.Integrated.1-1</n1:FQDD>
<n1:InstanceID>RAID.Integrated.1-1:RAIDrebuildRate</n1:InstanceID>
<n1:IsReadOnly>false</n1:IsReadOnly>
<n1:LowerBound>1</n1:LowerBound>
<n1:PendingValue/>
<n1:UpperBound>100</n1:UpperBound>
</n1:DCIM_RAIDInteger>
16.5 Listing the RAID Inventory-String Class
The RAID Inventory has these attributes: DCIM_RAIDEnumeration (see Section 16.1),
DCIM_RAIDInteger (see Section 16.3), and DCIM_RAIDString(this section).
Enumerate the DCIM_RAIDString class to display all the RAID controller string attributes in a System.
Enumerate RAIDString with the following parameters and syntax:
The ‘set attribute’ method in Section 16.19.3
uses the FQDD, AttributeName, and a value
equal to or between the LowerBound and
UpperBound fields as input.
The ‘set attributes’ method in section 16.19.4
uses the FQDD, AttributeName, and a value
equal to or between the LowerBound and
UpperBound fields as input.