White Papers

Power Topology Profile
Version 1.0.0a 41
"shall be assigned a value of 0."),
ValueMap { "0", "1", "2", "3", "4", "5", "6", "7..32767",
"32768..65535" },
Values { "Completed with No Error", "Not Supported",
"Error Occured", "Busy", "Invalid Reference",
"Invalid Parameter", "Access Denied", "DMTF Reserved",
"Vendor Specified" }]
uint32 ChangeAffectedElementsAssignedSequence (
[IN, Description (
"An array of ManagedElements.")]
CIM_ManagedElement REF ManagedElements[],
[IN, Description (
"An array of integers representing AssignedSequence of the "
"ManagedElement in the corresponding index of the "
"ManagedElements parameter.")]
uint16 AssignedSequence[],
[IN ( false ), OUT, Description (
"Reference to the job spawned if the operation continues "
"after the method returns. (May be null if the task is "
"completed).")]
CIM_ConcreteJob REF Job);
[Description (
"This method is called to configure the default configuration of "
"the managed system for the external grid redundancy in the case "
"the underlying instrumentation is unable to detect the external "
"grid redundancy and depends on the client input for its "
"configuration. \n "
"If there is no at least one instance of CIM_RedundancySet "
"representing the power supplies redundancy or there is no at "
"least one instance of CIM_RedundancySet representing external "
"power domain redundancy associated to the instance of "