White Papers

82 Version 1.3.0
Value
Description
2
Failed
Table 83 – SendTestSNMPTrap( ) Method: Parameters
1474
Qualifiers
Name
Type
Description/Values
IN, REQ
InstanceID
String
The property shall have the value of the
InstanceID property of the attribute for which the
test email alert is generated.
OUT
MessageID
String
Error Message ID may be used to look-up in the
Dell Message registry files. For more information,
see Error Message Registry.
OUT
Message
String
Error Message in English
OUT
MessageArguments[]
String
Substitution variables for dynamic error message.
Table 84 – SendTestSNMPTrap() Method: Standard Messages
1475
MessageID (OUT parameter)
Message
MessageArguments[]
RAC001
The command was successful
RAC002
General failure
RAC003
Missing required parameter
<parameter>
AttributeName, AttributeValue,
Target
RAC004
Invalid parameter value for
<parameter>
AttributeName, AttributeValue,
Target
RAC005
Mismatch in AttributeName and
AttributeValue count
RAC006
AttributeValue cannot be changed for
ReadOnly Attrinbute Name
RAC007
Input out of range
RAC008
Invalid boolean Value
RAC009
String exceeds maximum length
RAC010
Invalid character value
RAC012
User is not Authorized to perform this
operation
RAC013
Invalid FQDD
RAC014
Invalid Attribute was Entered
RAC015
Not one of the Possible Values for
AttributeName
AttributeName
RAC016
Invalid AttributeName
RAC018
Completed with Errors
RAC020
Completed
RAC021
DHCP is Enabled so cannot set
static values for IPAddress Net mask
or Gateway
RAC022
The User Name is not configured so
cannot Enable the User or set values
for User Password IPMILan
IPMISerial or User Admin Privilege
RAC023
The User Password is not configured
so cannot Enable the User or set