White Papers

Version 1.3.3 33
8.16 DCIM_LCService.LCWipe()
This method is called to delete all configurations from the Lifecycle controller before the system is retired.
Table 40 – DCIM_LCService.LCWipe() Method: Return Code Values
Value Description
1 Method is unsupported.
2 Error occurred
4096 Job started: REF returned to started CIM_ConcreteJob
Table 41 – DCIM_LCService.LCWipe() Method: Parameters
Qualifiers Name Type Description/Values
OUT MessageID String
Error Message ID- can be used to index into
Dell Message registry files
OUT Message String
Error Message in English corresponding to
MessageID is returned if the method fails to
execute
OUT MessageArguments string[]
Substitution variables for dynamic error
messages
8.17 DCIM_LCService.BackupImage()
This method is used to export system profile by backing up the firmware and saving configurations for the
Lifecycle Controller. The successful method execution shall export only the current values of the settable
attributes in the BIOS and Boot Management, Simple NIC, RAID, Lifecycle Controller (LC) Management,
and IDRAC profiles. Note that settings that are NOT settable through these attributes shall NOT be
exported.