White Papers

Version 1.0.2 17
Detailed requirements of the CIM_TimeService( ) method are specified in Table 14 and Table 15. No 340
standard messages are defined for this method. 341
Table 14 – CIM_TimeService.ManageTime( ) Method: Return Code Values 342
Value Description
0 Request was successfully executed.
2 Error occurred
Table 15 – CIM_TimeService.ManageTime( ) Method: Parameters 343
Qualifiers Name Type Description/Values
IN, REQ GetRequest Boolean The parameter shall be set to TRUE to request the time
for the iDRAC, and shall be set to FALSE for setting the
time for the iDRAC.
IN, OUT TimeData datetime On input, this is the desired value for the service
processor time. On output, this is the service processor
time.
OUT MessageID string
Error Message ID may be used to look-up in the Dell
Message registry files. For more information, see Error
Message Registry
OUT Message string
Error Message in English corresponding to MessageID
is returned if the method fails to execute
OUT
MessageArgumen
ts[]
string Substitution variables for dynamic error messages
Table 16 – CIM_TimeService.ManageTime( ) Method: Standard Messages 344
MessageID (OUT parameter) Message MessageArguments[]
RAC048
The command was successful
NA
RAC040
Missing parameter(s)
<parameters> GetRequest
RAC038
Cannot perform the operation due
to an unknown error in iDRAC.
NA
RAC049
Resource allocation failure
NA
RAC039
Invalid parameter value for
<parameter>
GetRequest
345
9 Use Cases 346
See Lifecycle Controller (LC) Integration Best Practices Guide. 347
10 CIM Elements 348
No additional details specified. 349