White Papers

Version 1.0.0 19
7.3.1 DCIM_AggregationMetricDefinition 355
The following clauses define the requirements for the DCIM_AggregationMetricDefinition class. 356
DCIM_AggregationMetricDefinition is a derivation of CIM_AggregationMetricDefinition. 357
The DCIM_BMServiceAffectsElement association’s AffectedElement property shall reference 358
DCIM_AggregationMetricDefinition instances. 359
The DCIM_BMServiceAffectsElement association’s ElementEffects property shall have value 5 360
(Manages). 361
The DCIM_MetricDefForME association’s Dependant property shall reference 362
DCIM_AggregationMetricDefinition instances. 363
The DCIM_AggrMetricInstance association’s Antecedent property shall reference 364
DCIM_AggregationMetricDefinition instances. 365
7.3.1.1 Resource URIs for WinRM® 366
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-schema/2/ 367
DCIM_AggregationMetricDefinition?__cimnamespace= root/dcim” 368
The key property shall be the Id. 369
The instance Resource URI DCIM_AggregationMetricDefinition instance shall be: 370
“http://schemas.dell.com/wbem/wscim/1/cim-schema/2/ DCIM_AggregationMetricDefinition? 371
?__cimnamespace=root/dcim+Id=<Id>” 372
7.3.1.2 Operations 373
The following table details the implemented operations on DCIM_AggregationMetricDefinition. 374
Table 9 – DCIM_AggregationMetricDefinition Operations 375
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
Associators
Mandatory
Instance URI
References
Mandatory
Instance URI
7.3.1.3 Properties 376
The following table details the requirements for implementing the DCIM_AggregationMetricDefinition 377
instance representing max power consumption metric in Amperes. The most derived class name of this 378
instance shall be DCIM_AggregationMetricDefinition. 379
If the column “Property Name” matches the property name, the property either shall have the value 380
denoted in the corresponding column “Additional Requirements”, or shall be implemented according to 381
the requirements in the corresponding column “Additional Requirements”. 382
Table 10 – DCIM_AggregationMetricDefinition: Maximum Power Consumption Metric in Amperes 383
Properties 384
Property Name
Type
Requirement
Additional Requirements
ChangeType
uint16
Mandatory
The property shall have value 5 (Simple Function)
DataType
uint16
Mandatory
The property shall have value 12 (uint32)
ElementName
string
Mandatory
The property shall have value “Peak Amp Power
Consumption”