White Papers

14 Version 1.0.0
7.4.2 Operations 275
The following table details the implemented operations on DCIM_Chassis. 276
Table 9 – DCIM_Chassis - Operations 277
Operation Name
Requirements
Required Input
Get
Mandatory
Instance Resource URI
Enumerate
Mandatory
Class Resource URI
278
7.4.3 Properties 279
The table lists the implemented properties for DCIM_Chassis instance in a system. The “Type” column 280
shall denote the corresponding property type. The “Requirements” column shall denote whether the 281
property is implemented (for requirement definitions, see section 3). The “Additional Requirement” 282
column shall denote either possible values for the property, or requirements on the value formulation 283
Table 10 – DCIM_Chassis - Properties 284
Property Name Type Requirement Additional Requirement
CreationClassName string
Mandatory
This property value shall be “DCIM_Chassis”
Tag string
Mandatory
This property value shall be “mainsystemchassis”
Manufacturer string Mandatory
The property shall identify the manufacturer of the
platform.
Model stirng Mandatory The property shall identify the platform model.
PartNumber
string Mandatory This property shall be set to NULL.
SerialNumber
string Mandatory This propety value shall be the platform’s service tag.
SKU
string Mandatory
This property value shall be the platform’s ePPID that
uniquely identifies the platform. For more information
see Dell SMBIOS Specification.
ChassisPackageType
uint16 Mandatory This property value shall be 17(Main System Chassis).
ElementName
String Mandatory
This property value shall have the format “DCIM
<Model> Chassis”
PackageType
uint16
Mandatory
This property value shall be 3(Chassis/Frame) for
monolithic platforms, or 16 (Blade) for blade platform.
CanBeFRUed
boolean Mandatory This property value shall be TRUE.
SystemID
uint16 Mandatory
This property value shall be the 3 digit Dell System ID
for the platform.