White Papers
Table Of Contents
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Symbols and Abbreviated Terms
- 5 Synopsis
- 6 Description
- 7 Implementation Description
- 8 Methods
- Table 29 – DCIM_FCService.SetAttribute() Method: Return Code Values
- The SetAttributes() method is used to set or change the values of a group of attributes.
- Table 32 – DCIM_FCService.SetAttributes() Method: Return Code Values
- The CreateTargetedConfigJob() method is used to apply the pending values created by the SetAttribute and SetAttributes methods. The successful execution of this method creates a job for application of pending attribute values.
- CreateTargetedConfigJob method supports the following optional input parameters
- 1. RebootJobType: When provided in the input parameters, creates a specific reboot job to “PowerCycle”, “Graceful Reboot without forced shutdown”, or “Graceful Reboot with forced shutdown”. This parameter only creates the RebootJob and does not schedu...
- 2. ScheduledStartTime: When provided in the input parameters, schedules the “configuration job” and the optional “reboot job” at the specified start time. A special value of “TIME_NOW” schedules the job(s) immediately.
- 3. UntilTime: This parameter has a dependency on “ScheduledStartTime”, together “ScheduledStartTime” and “UntilTime” define a time window for scheduling the job(s). Once scheduled, jobs will be executed within the time window.
- If CreateTargetedConfigJob method is executed without the three optional parameters discussed above, then configuration job is created but not scheduled. However, this configuration job can be scheduled later using the DCIM_JobService.SetupJobQueue ()...
- Table 35 – DCIM_FCService.CreateTargetedConfigJob() Method: Return Code Values
- Table 38 – DCIM_FCService.DeletePendingConfiguration() Method: Return Code Values
- 9 Use Cases
- 10 CIM Elements
- 11 Privilege and License Requirement
16 Version 1.0.0
Property Name
Requirement
Type
Requirement and description
WWN
Mandatory
String
This property represents the World
Wide Name.
WWPN
Mandatory
String
This property represents the World
Wide Port Name.
7.2 FC HBA Capabilities – DCIM_FCCapabilities
346
This section describes the implementation for the DCIM_FCCapabilities class.
347
This class shall be instantiated in the Implementation Namespace: root/dcim.
348
7.2.1 Resource URIs for WinRM
®
349
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-
350
schema/2/DCIM_FCCapabilities?__cimnamespace=root/dcim”
351
The key property shall be the InstanceID.
352
The instance Resource URI for DCIM_FCCapabilities instance shall be:
353
“http://schemas.dell.com/wbem/wscim/1/cim-
354
schema/2/DCIM_FCCapabilities?__cimnamespace=root/dcim+InstanceID=<FQDD>”
355
7.2.2 Operations
356
The following table lists the implemented operations on DCIM_FCCapabilities.
357
Table 6 – DCIM_FCCapabilities - Operations
358
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
359
7.2.3 Class Properties
360
The following table lists the implemented properties for DCIM_FCCapabilities instance representing FC
361
HBA capabilities in a system. The “Requirements” column shall denote whether the property is
362
implemented (for requirement definitions, see section 3). The “Additional Requirements” column shall
363
denote either possible values for the property, or requirements on the value formulation.
364
Table 7 – DCIM_FCCapabilities - Properties
365
Property Name
Requirement
Type
Requirement and description
FQDD
Mandatory
string
A string containing the Fully Qualified Device
Description, a user-friendly name for the
object.
InstanceID
Mandatory
string
The property value shall be the FQDD
property value.
FCMaxIOsPerSession
Mandatory
uint16
This property represents the maximum
number of I/Os per connection
FCMaxNumberLogins
Mandatory
uint16
This property represents the maximum
number of logins per port