White Papers
Table Of Contents
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Symbols and Abbreviated Terms
- 5 Synopsis
- 6 Description
- 7 Implementation Description
- 8 Methods
- Table 29 – DCIM_FCService.SetAttribute() Method: Return Code Values
- The SetAttributes() method is used to set or change the values of a group of attributes.
- Table 32 – DCIM_FCService.SetAttributes() Method: Return Code Values
- The CreateTargetedConfigJob() method is used to apply the pending values created by the SetAttribute and SetAttributes methods. The successful execution of this method creates a job for application of pending attribute values.
- CreateTargetedConfigJob method supports the following optional input parameters
- 1. RebootJobType: When provided in the input parameters, creates a specific reboot job to “PowerCycle”, “Graceful Reboot without forced shutdown”, or “Graceful Reboot with forced shutdown”. This parameter only creates the RebootJob and does not schedu...
- 2. ScheduledStartTime: When provided in the input parameters, schedules the “configuration job” and the optional “reboot job” at the specified start time. A special value of “TIME_NOW” schedules the job(s) immediately.
- 3. UntilTime: This parameter has a dependency on “ScheduledStartTime”, together “ScheduledStartTime” and “UntilTime” define a time window for scheduling the job(s). Once scheduled, jobs will be executed within the time window.
- If CreateTargetedConfigJob method is executed without the three optional parameters discussed above, then configuration job is created but not scheduled. However, this configuration job can be scheduled later using the DCIM_JobService.SetupJobQueue ()...
- Table 35 – DCIM_FCService.CreateTargetedConfigJob() Method: Return Code Values
- Table 38 – DCIM_FCService.DeletePendingConfiguration() Method: Return Code Values
- 9 Use Cases
- 10 CIM Elements
- 11 Privilege and License Requirement
4 Version 1.0.0
Figures
96
Figure 1 – Fiber Channel Profile: Class Diagram ....................................................................................... 11
97
98
Tables
99
Table 1 – Related Profiles ........................................................................................................................... 10
100
Table 3 – CIM Elements: Fiber Channel Profile.......................................................................................... 13
101
Table 4 – DCIM_FCView - Operations ....................................................................................................... 14
102
Table 5 – DCIM_FCView - Properties ......................................................................................................... 14
103
Table 6 – DCIM_FCCapabilities - Operations ............................................................................................. 16
104
Table 7 – DCIM_FCCapabilities - Properties .............................................................................................. 16
105
Table 8 – DCIM_FCStatistics - Operations ................................................................................................. 18
106
Table 9 – DCIM_FCStatistics - Properties .................................................................................................. 18
107
Table 10 – DCIM_FCEnumeration - Operations ......................................................................................... 20
108
Table 11 – Class: DCIM_FCEnumeration ................................................................................................... 21
109
Table 12 – DCIM_FCString - Operations .................................................................................................... 22
110
Table 13 – Class: DCIM_FCString .............................................................................................................. 23
111
Table 14 – DCIM_FCInteger - Operations .................................................................................................. 24
112
Table 15 – Class: DCIM_FCInteger ............................................................................................................ 25
113
Table 16 – DCIM_FCEnumeration Port Configuration ............................................................................... 25
114
Table 17 – DCIM_FCInteger Port Configuration ......................................................................................... 26
115
Table 18 – DCIM_FCString Port Configuration........................................................................................... 26
116
Table 19 – DCIM_FCEnumeration Fiber Channel Target Configuration .................................................... 27
117
Table 20 – DCIM_FCInteger Fiber Channel Target Configuration ............................................................. 27
118
Table 21 – DCIM_FCString Fiber Channel Target Configuration ............................................................... 27
119
Table 22 – DCIM_FCEnumeration HBA Configuration ............................................................................... 27
120
Table 23 – DCIM_FCInteger HBA Configuration ........................................................................................ 28
121
Table 24 – DCIM_FCString Firmware and Device Information .................................................................. 28
122
Table 25 – DCIM_FCService – Operations ................................................................................................ 29
123
Table 26 – Class: DCIM_FCService ........................................................................................................... 30
124
Table 27 – DCIM_LCRegisteredProfile - Operations .................................................................................. 30
125
Table 28 – Class: DCIM_LCRegisteredProfile ............................................................................................ 30
126
Table 29 – DCIM_FCService.SetAttribute( ) Method: Return Code Values ............................................... 32
127
Table 30 – DCIM_FCService.SetAttribute( ) Method: Parameters ............................................................. 32
128
Table 31 – DCIM_FCService.SetAttribute( ) Method: Standard Messages ................................................ 32
129
Table 32 – DCIM_FCService.SetAttributes( ) Method: Return Code Values .............................................. 33
130
Table 33 – DCIM_FCService.SetAttributes( ) Method: Parameters ............................................................ 33
131
Table 34 – DCIM_FCService.SetAttributes( ) Method: Standard Messages .............................................. 34
132
Table 35 – DCIM_FCService.CreateTargetedConfigJob( ) Method: Return Code Values ......................... 35
133
Table 36 – DCIM_FCService.CreateTargetedConfigJob( ) Method: Parameters ....................................... 36
134
Table 37 – DCIM_FCService.CreateTargetedConfigJob( ) Method: Standard Messages ......................... 36
135
Table 38 – DCIM_FCService.DeletePendingConfiguration( ) Method: Return Code Values ..................... 37
136
Table 39 – DCIM_FCService.DeletePendingConfiguration( ) Method: Parameters ................................... 37
137
Table 40 – DCIM_FCService.DeletePendingConfiguration( ) Method: Standard Messages...................... 38
138
Table 41 – Privilege and License Requirements ........................................................................................ 39
139
140