White Papers
Version 1.2.0 7
3.10
183
shall not – Indicates requirements to be followed strictly in order to conform to the document and from
184
which no deviation is permitted.
185
3.11
186
should – Indicates that among several possibilities, one is recommended as particularly suitable, without
187
mentioning or excluding others, or that a certain course of action is preferred but not necessarily required.
188
3.12
189
should not – Indicates that a certain possibility or course of action is deprecated but not prohibited
190
3.13
191
FQDD – Fully Qualified Device Descriptor is used to identify a particular component in a system.
192
3.14
193
Interop Namespace – Interop Namespace is where instrumentation instantiates classes to advertise its
194
capabilities for client discovery.
195
3.15
196
Implementation Namespace – Implementation Namespace is where instrumentation instantiates
197
classes relevant to executing core management tasks.
198
3.16
199
ENUMERATE – Refers to WS-MAN ENUMERATE operation as described in Section 8.2 of
200
DSP0226_V1.1 and Section 9.1 of DSP0227_V1.0
201
3.17
202
GET – Refers to WS-MAN GET operation as defined in Section 7.3 of DSP00226_V1.1 and Section 7.1
203
of DSP0227_V1.0
204
4 Symbols and Abbreviated Terms
205
4.1
206
CIM – Common Information Model
207
4.2
208
iDRAC – Integrated Dell Remote Access Controller is a management controller for blades and rack and
209
tower servers
210
4.3
211
CMC – Chassis Management Controller is a management controller for the modular chassis
212
4.4
213
iSCSI – Internet Small Computer System Interface, an Internet Protocol (IP)-based storage networking
214
standard for linking data storage facilities.
215
5 Synopsis
216
Profile Name: Job Control
217
Version: 1.2.0
218
Organization: Dell
219