White Papers
Version 1.2.0 7
3.10 179
shall not – Indicates requirements to be followed strictly in order to conform to the document and from 180
which no deviation is permitted. 181
3.11 182
should – Indicates that among several possibilities, one is recommended as particularly suitable, without 183
mentioning or excluding others, or that a certain course of action is preferred but not necessarily required. 184
3.12 185
should not – Indicates that a certain possibility or course of action is deprecated but not prohibited 186
3.13 187
FQDD – Fully Qualified Device Descriptor is used to identify a particular component in a system. 188
3.14 189
Interop Namespace – Interop Namespace is where instrumentation instantiates classes to advertise its 190
capabilities for client discovery. 191
3.15 192
Implementation Namespace – Implementation Namespace is where instrumentation instantiates 193
classes relevant to executing core management tasks. 194
3.16 195
ENUMERATE – Refers to WS-MAN ENUMERATE operation as described in Section 8.2 of 196
DSP0226_V1.1 and Section 9.1 of DSP0227_V1.0 197
3.17 198
GET – Refers to WS-MAN GET operation as defined in Section 7.3 of DSP00226_V1.1 and Section 7.1 199
of DSP0227_V1.0 200
4 Symbols and Abbreviated Terms 201
4.1 202
CIM – Common Information Model 203
4.2 204
iDRAC – Integrated Dell Remote Access Controller is a management controller for blades and rack and 205
tower servers 206
4.3 207
CMC – Chassis Management Controller is a management controller for the modular chassis 208
4.4 209
iSCSI – Internet Small Computer System Interface, an Internet Protocol (IP)-based storage networking 210
standard for linking data storage facilities. 211
5 Synopsis 212
Profile Name: Job Control 213
Version: 1.2.0 214
Organization: Dell 215