White Papers

14 Version 2.1.1
The DCIM_SystemPSDevice association shall reference DCIM_PowerSupply instances and the
157
DCIM_ComputerSystem instance.
158
The DCIM_PSMemberOfCollection association shall reference DCIM_PowerSupply instances and the
159
DCIM_PowerRedundancySet instance.
160
7.2.1 Resource URIs for WinRM®
161
The class Resource URI shall be “http://schemas.dell.com/wbem/wscim/1/cim-
162
schema/2/DCIM_PowerSupply?__cimnamespace=root/dcim”
163
The key properties shall be the SystemCreationClassName, SystemName, CreationClassName and
164
DeviceID.
165
The instance Resource URI for DCIM_PowerSupply instance shall be:
166
“http://schemas.dell.com/wbem/wscim/1/cim-schema/2/DCIM_PowerSupplyView?
167
?__cimnamespace=root/dcim+SystemCreationClassName=DCIM_ComputerSystem+SystemName=srv:s
168
ystem+CreationClassName=DCIM_PowerSupply+DeviceID =<DeviceID>”
169
7.2.2 Operations
170
The following table lists the operations implemented on DCIM_PowerSupply.
171
Table 5 – DCIM_PowerSupply - Operations
172
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
173
7.2.3 Class Properties
174
The following table lists the implemented properties for DCIM_PowerSupply instance in a system. The
175
“Requirements” column shall denote whether the property is implemented (for requirement definitions,
176
see section 3). The “Additional Requirements” column shall denote either possible values for the property,
177
or requirements on the value formulation.
178
Table 6 – DCIM_PowerSupply - Properties
179
Property Name
Requirements
Type
Additional Requirement
SystemCreationClassName
Mandatory
string
This property value shall be
"DCIM_ComputerSystem"
SystemName
Mandatory
string
This property value shall be"srv:system"
CreationClassName
Mandatory
string
This property value shall be
"DCIM_PowerSupply"
DeviceID
Mandatory
string
The property value shall be unique
identifier.
ElementName
Mandatory
string
This property value shall be "Power
Supply".
InputPowerUnits
Mandatory
string
This property indicates the
programmatic units for the input power
properties. This property value shall be
in "watt".
RatedMaxOutputPower
Mandatory
uint32
This property indicates the maximum
amount of output (DC) power.
0 shall mean “Unknown”.