White Papers

16 Version 1.0.0
Property Name Type Requirement Additonal Requirement
SystemCreationClassName
string
Mandatory
The property value shall be
"DCIM_ComputerSystem".
SystemName
string
Mandatory
The property value shall be "system".
CreationClassName
string
Mandatory
The property value shall be
"DCIM_NumericSensor".
DeviceID
string
Mandatory
The property shall have the sensor FQDD value.
BaseUnits
uint16
Mandatory
The property value shall be one of the following:
• 2 (Degrees C)
• 5 (Volts)
• 19 (RPM)
CurrentReading
sint32
Mandatory
The property value shall be in units specified by
the BaseUnit property value multiplied by 10 to
the power of the UnitModier property value.
CurrentState
string
Mandatory
The present state indicated by the Sensor. The
property value shall be a value from the
"PossibleStates" value array. The property may
have "Unknown" value.
ElementName
string
Mandatory
The property shall describe the sensor location.
EnabledState
uint16
Mandatory
The property value shall be 2 (enabled)
HealthState
uint16
Mandatory
Indicates the current health of the sensor. The
property value shall be one of the following:
• 0(Unknown)
• 5 (OK)
• 10(Degraded/Warning)
• 25 (Critical Failure)
OperationalStatus[]
uint16
Mandatory
Indicates the current statuses of the sensor. The
property value shall be one of the following:
• 0(Unknown)
• 2(OK)
• 3(Degraded)
• 6 (Error)
PossibleStates[]
string
Mandatory
The property shall have the following values:
• Other
•
Unknown
•
OK
•
Non-Critical
•
Critical
•
Fatal
PrimaryStatus
uint16
Mandatory
The property value shall be one of the following:
• 0(Unknown)
•
1(OK)
•
2(Degraded)
•
3 (Error)
RateUnits
uint16
Mandatory
The property value shall be 0 (None)
RequestedState
uint16
Mandatory
The property value shall be 12 (Not Applicable)
Resolution
uint32
Mandatory
The property value shall be 1.