White Papers

Version 4.0.0 10
Table 4. DCIM_SPComputerSystem - Properties
Property Name
Type
Requirements
Additional Requirement
CreationClassName
string
Mandatory
The property value shall be “DCIM_SPComputerSystem”
Name
string
Mandatory
The property value shall be “systemmc”
Element Name
string
Mandatory
EnabledState
string
Mandatory
The property value shall be 2 (Enabled)
OperationalStatus
uint16
Mandatory
The property value shall be 2 (OK)
HealthState
uint16
Mandatory
The property value shall be 5 (OK)
PrimaryStatus
uint16
Mandatory
The property value shall be 1
(OK)
Dedicated
uint16
Mandatory
The property value shall be 28 (Management Controller)
RequestedState
uint16
Mandatory
The property value shall be 12 (not applicable)
DCIM_TimeService – Time Service
This section describes the implementation for the DCIM_TimeService class representing the time service for the
service processor.
The DCIM_SPHostedTimeService association shall reference the DCIM_TimeService instance and associate it
with the DCIM_SPComputerSystem instance.
This class shall be instantiated in the Implementation Namespace.
Resource URIs for WinRM
®
The class Resource URI shall be
“http://schemas.dell.com/wbem/wscim/1/cim-schema/2/DCIM_TimeService?__cimnamespace=root/dcim”
The key properties shall be the CreationClassName, SystemName, Name, and SystemCreationClassName.
The instance Resource URI for DCIM_TimeService instance shall be:
“http://schemas.dell.com/wbem/wscim/1/cim-schema/2/DCIM_TimeService?__cimnamespace=root/dcim
+CreationClassName=DCIM_TimeService+SystemCreationClassName=DCIM_SPComputerSystem
+SystemName= systemmc+Name= DCIMTimeService 1”
Operations
The following table lists the operations implemented on DCIM_SystemInteger.
Table 5. DCIM_SystemInteger – Operations
Operation Name
Requirements
Required Input
Get
Mandatory
Instance URI
Enumerate
Mandatory
Class URI
Invoke
Mandatory
Insatnce URI
Class Properties
The following table lists the implemented properties for DCIM_TimeService instance in a system.
The “Requirements” column shall denote whether the property is implemented (for requirement definitions, see
section 3). The “Additional Requirements” column shall denote either possible values for the property, or
requirements on the value formulation.