White Papers

24
For configuring SupportAssist after the registration is complete, set the following attributes.
Command
Acceptable values
racadm set idrac.supportassist.EmailOptIn Yes
EmailOptIn indicates the option to receive email notifications
from Dell EMC on case creation and collection upload.
Accepted values are No (0) and Yes (1) with Yes being the
default value
racadm set idrac.supportassist.PreferredLanguage 0
Preferred Language for email communication from Dell EMC.
Accepted values are 0-English;1-German;2-French;3-
Japanese;4-Spanish;5-Simplified Chinese with English being
the default value.
racadm set idrac.supportassist.FilterAutoCollections No
Indicates whether to filter automatic collections for
identification information. Accepted values are No (0) and Yes
(1) with No being the default value.
racadm set
idrac.supportassist.ProSupportPlusRecommendationsReport 0
Indicates whether you want to receive recommendations for
the server in the ProSupport Plus Recommendations Report.
Accepted values are Disabled (0) and Enabled (1) with
Disabled being the default value.
Note: The recommendation report setting is applicable only
when the automatic collections schedule is set to weekly or
monthly. If the automatic collections schedule is set to
quarterly, the server is not included in the recommendation
report.
racadm set idrac.supportassist.EventBasedAutoCollection
Indicates whether the SupportAssist event-based automatic
collection feature is enabled on the server.
Accepted values are Disabled (0) and Enabled (1) with
Disabled being the default value.
Note: Event based automatic collections can be enabled only
after registration is complete.
racadm set idrac.supportassist.SupportAssistEnableState 0
Indicates whether the SupportAssist automatic collection
features are enabled on the server.
Accepted values are Disabled (0) and Enabled (1) with
Disabled being the default value.
Note: SupportAssist enable state can be enabled only after
registration is complete.